Addendum/Correction to file SUPRAFIX.TXT

RE:  "Fax Communications Error - 102"  fax problems with 
      Supra V.32bis Fax/Modems


If the fixes outlined in file SUPRAFIX.TXT did not correct your fax
problems ("Fax Communications Error - 102"), Terri Isom of Supra
Technical Support offers the following:

       ***********************************************************
WINFAX USERS
------------
          The earlier file SUPRAFIX.TXT mention some lines to 
          add to the [386Enh] section of your WIN.INI file.

            NOTE:  These changes should be made to your
                   SYSTEM.INI file,  *not*  WIN.INI.  If you
                   have a 386SX or better, your SYSTEM.INI file
                   should already contain a [386Enh] section.

       ***********************************************************

ALL USERS
---------
        Use the following initialization string in your
        fax software:
                        AT&F&C1&D2

If this doesn't help:

        Reinstall WinFax with the modem turned OFF.
        This should allow you to configure your fax 
        software for Class 1 operation during the install.

        *****   Supra is aware of compaitbility problems with
                certain Class 2 fax operations in the Rev. H
                ROM firmware.  They are working on this problem.

                (If you are experiencing any problems I would
                 suggest contacting Supra Tech Support and 
                 informing them in an effort to expedite a
                 correction for this problem.  They seem to be
                 responsive to faxes which can be done quickly
                 at times of low rates.)

        If the software supplied with your modem does NOT allow
        you to configure for Class 1 operation while reinstalling
        with the modem turned off, contact Supra Tech Support.


As with the info presented in SUPRAFIX.TXT, this file is presented for
informational purposes.  This information was supplied by Terri Isom of
Supra Technnical Support.  I claim no liability or responsibility for 
consequences resulting from the use of this information.

Keith Parkansky
Uploaded to Exec-PC 1-14-93
Exec-PC (414) 789-4210